Home Drywall Repair Tips
It can be frustrating when your drywall is damaged, however, it is not unusual. This is why learning how to do home drywall repair can prove invaluable.
Repairing drywall is pretty straightforward, it just requires the proper tools and materials. If you are a first-time DIY homeowner, don’t panic, this post will walk you through everything you need to know.
Tools And Materials
To begin with, the tools and materials you will need to do your drywall repair are listed below.
-
Drywall saw
-
Drill
-
Utility knife
-
Drywall/taping knife
-
Tape measure
-
Adhesive
-
Drywall tape
-
Masking tape
-
Drywall screws
-
Joint compound
All of these tools can be found at the local drywall store. In addition to this, remember to wear the right safety gear to reduce the risk of injury.
Drywall Holes
When it comes to repairing holes, you need patch kits that are specific to the size of the hole you are repairing.
Small
For small holes, you can use a self-adhesive mesh patch and then put it over the hole. Once done, use your drywall knife to cover this with spackle compound and then feather the edge so it blends in the rest of the wall. Once done, leave the spackle to dry and then sand smooth.
Large
The process of repairing large holes is similar to the above, just follow these and attach a furring strip in the hole with screws. Once you have done this, screw the patch into place and put the joint tape on to prevent cracks. The rest is just covering it up with some joint compound, left to dry, and then sand smooth!
For details about the home drywall repair services that Killeen Drywall and Painting can provide, and if you live or work in or around the Killeen, TX area, please do not hesitate to contact us at this number (254) 284-1431 today.
Review Us